Broken aluminum door and window equipment refers to the mechanical equipment needed to process the broken aluminum doors and windows. When installing, it must be properly installed to ensure the normal operation of the equipment. Below, let Xiaobian introduce the installation of broken aluminum door and window equipment. Precautions.

1. Equipment: Because of the large number of broken aluminum door and window equipment, there may be several machines for each type of equipment. Especially important for the inspection of door and window equipment, such as the left and right working state of the saw head, the speed of the saw blade in and out, the gas pipe plug of the cutting saw, and so on.

2. Gas source: Since the pressure of the broken aluminum door and window equipment is the cylinder pressure, it is necessary to ensure sufficient air supply. This is the premise of efficient use of the equipment. If the air pressure is not reached, the double-head cutting of the broken aluminum profile The saw blade enters and exits will be affected, so the processing effect will be affected. Generally speaking, a set of broken aluminum door and window equipment must ensure that the air pressure can reach 8 pressures and the air supply flow rate reaches 0.3. If there are too many equipments, it is not enough to rely on the air pump. You need to prepare one or two gas storage tanks.

3. Power: Because the common voltage of broken aluminum door and window equipment is 380V, we must pay attention to the connection between the fire line and the neutral line when wiring. Under normal circumstances, the door and window equipment manufacturers can separate the color, the fire line is blue or black. The zero line is red (each factory depends on its own situation). If the fire line is reversed, just switch it at both ends of the line.

Soild Shirts

Mens Solid Shirts,Mens Solid T Shirts,Solid Casual Shirts,Solid Cotton Shirts

Shaoxing Shanhe garments co.,ltd , https://www.sx-sanhe.com