What do most turquoise lovers look at when buying Turquoise? material? This is of course impossible. There are only a small number of people who can accurately distinguish between good and bad materials. Most consumers still look at the sale of Turquoise. The so-called selling phase, how to sell the phase, generally speaking, the iron wire is less, the gloss is good, the color is good, the surface of the turquoise stone is flat, the pine stone has no pits, no cracks, no white spots. However, the problem has come. The real rough stone without optimization is because the wool itself has no artificially optimized appearance because of the wool itself (except for the best). Most of the turquoise is fine when it is polished, but when it comes to polishing, it may not be fine. The toughness of the turquoise is not so good, it is well known in the industry, and the good materials are also very brittle. Therefore, it is easy to crack when polishing. Technological innovations for decades have not solved this problem. White spots also appear during polishing, and the temperature is inevitably high during polishing. Turquoise is a water-bearing gem. When the temperature is high, there will be some places on the natural surface that lose water. When it loses water and turns white, it forms a white spot. In fact, this kind of white point has no effect on the material, and it will disappear after playing for a while. The pits on the surface of the turquoise are also easy to appear when polishing. The pit of the turquoise, cracked, white spots. These three kinds, as long as they are raw ore, are hard to avoid. Some Turquoise enthusiasts are too pursuing perfection, which indirectly promotes some chaos in the turquoise market. Optimize the product to fill the original A-grade product, filling the glue and filling it, and so on. Let a lot of players have no choice in the purchase, obviously want the original mine, but can buy the hand is to optimize the B goods. Yes, there are iron wires. A lot of iron wire, buckled will slag, this kind of customer, customers are not willing to. However, the domestic material, basically, the density of the iron wire is much lower than that of the turquoise stone. This is the reason why some loose stone iron wire will fall off the slag. If the customer does not understand, it is not good to know that the slag is bad. In the past two years, there has been a method in the industry. It is a gospel of many factories. For the players, it is not good or bad. There is a 502 Dafa in the market. After the polished stone is finished, first use 502 to brush a layer on the surface, and then polish it with sandpaper. Polished, very beautiful, no pits and cracks. There is also no white spot, and the place where the iron wire density is low is not slag because it penetrates into 502. It looks very beautiful and sells very well. Nowadays, the so-called raw ore in the market, throwing away the traditionally optimized rubber goods (processing of garbage materials), basically more than 90% of this is the 502 stone. We call it glue in the industry. Nowadays, many factories, when processing the loose stone material, are afraid that the turquoise will crack when it is polished, which will affect the sales. This kind of processing is good, and the cost is much lower than that of traditionally processed ore. It sells very well. Basically, I can't see the difference with the original mine. The experts don't get started, but I don't think about it. The sale of such rubber goods has invisibly hit the ore. It is true that there are several people who can recognize the high price and the difference in selling. However, for some collectors, it is better to choose the original ore. In the daily play, the oil secreted by the human body will form a protective film on the surface of the turquoise, and it will penetrate evenly. The color of turquoise will become more and more beautiful and natural. The opposite is better than the optimized one, so there is a saying in the industry that "playing loose stone". It is pretty that there is no artificial facelift before it is played.
A Sustainable Mesh Banner. PVC free frontlit material for short-term outdoor advertising for billboards, POS, wall coverings and retail displays. Phthalate Free, lightweight but excellent tensile and tear strength make it easy to handle and lower transportation costs. Widths up to 5 meters.
Pvc Free Mesh Banner,Eco-Friendly Mesh Banner,Eco-Tex Mesh Banner,Sustainable Mesh Banner Jiangsu Naisi New Material Technology Ltd. , https://www.igreentarps.com
